55世纪钢结构(工程结构)工程质量的优劣，主要取决于人为，施焊设备、施工工艺、焊材、施焊者技术水平和环境因素(factor)等方面，所谓人、机、料、法、环之五大要素，故在钢结构(工程结构)工程实施过程中，很多情况下应在特别注意，或进行有用地防范（解释:防备、戒备)。

The quality of steel structure (engineering structure) engineering mainly depends on the man-made, welding equipment, construction technology, welding materials, welding technical level and environmental factors. The so-called man, machine, material, method and environment are the five elements. Therefore, in the process of steel structure (engineering structure) engineering implementation, special attention should be paid or useful prevention should be carried out in many cases Alert).

一、对采用的钢材、焊材、焊 接方法和位置（position)、接头形式、施焊预热、后热处理及焊 接工艺参数等，是否按规定进行了焊 接工艺评定。

55世纪1、 Whether the welding procedure qualification has been carried out for the steel, welding material, welding method and position, joint form, welding preheating, post heat treatment and welding process parameters.

55世纪二、现场拼装的场地平整性，压实度和使用的临时支撑胎架、马櫈的强度（strength)、刚度及稳定（解释:稳固安 定；没有变动)性(Thestabilityof)等是否能满足施工工艺和钢构件拼装后的精度（度）要求。

2、 The site evenness, compactness, strength, rigidity and stability of temporary support jig and saddle used for field assembly (explanation: stable and stable; construction cost: 1; Whether the stability can meet the requirements of construction technology and accuracy of steel components after assembly.

三、应有预起拱的构件，其起拱值是否符合设计要求进行了复核（审查核对)。

3、 If there should be pre arched components, whether the arched value meets the design requirements has been checked (checked).

55世纪四、钢结构(工程结构)拼装中，是否已注意腹杆与主杆或主管与钢球的没有偏心现象再施焊。

55世纪4、 During the assembly of steel structure (engineering structure), whether attention has been paid to whether there is no eccentricity between web member and main member or between main pipe and steel ball before welding.

55世纪五、巡查焊工是否都具有上岗证，并在规定的范围内施焊。

5、 Inspect whether all welders have work license and carry out welding within the specified scope.

六、在低温、风雨天气环境下的施焊操作是否已有满足工艺质量的相应措施（指针对问题的解决办法)。

55世纪6、 Whether the welding operation in low temperature and rainy weather has the corresponding measures to meet the process quality (the solution to the problem).

七、焊材是否匹配，焊条是否按规定进行烘干后再使用。

7、 Whether the welding materials match, and whether the welding rod is dried according to the regulations before use.

55世纪八、焊 接缝坡口部位施焊前是否已对锈迹、泥污或误涂的油漆进行了专门的清理，是否已考虑（consider)并采用了使焊 接应力和焊 接变形很小的方法和施焊工艺。

8、 Whether the rust, mud or mistakenly painted paint has been specially cleaned before welding at the groove of welding joint, and whether the method and welding process to minimize welding stress and welding deformation have been considered.

55世纪九、焊 接缝间隙是否符合钢结构(工程结构)设计要求。

9、 Whether the welding gap meets the design requirements of steel structure (engineering structure).

十、设计要求应使用的衬钢或垫圈是否已衬放到位后再施焊。

10、 Whether the steel lining or gasket required by the design has been lined in place before welding.

以上就是济南彩钢瓦c型钢结构的小编为大家介绍相关内容，希望可以帮助到大家，更多精彩内容可以直接关注;http://jyjfsj.com

55世纪The above is Jinan color steel tile C steel structure for you to introduce the relevant content, hope to help you, more wonderful content can be directly concerned about; http://jyjfsj.com