你知道济南楼承板在使用中常见的问题有哪些吗?这对于一个新手，下面的内容是非常有用的，接下来小编会给大家简单的分析一下！

Do you know the common problems in the use of Jinan floor bearing plate? For a novice, the following content is very useful. Next, I will give you a simple analysis!

一、楼承板是什么，选用的材质是什么?

1、 What is the floor bearing plate and the material used?

楼承板是用在多高层建筑中替代原始模板运用。楼承板的材质也即是指镀锌含有量和屈从强度，常见的楼承板有Q235和Q345和G410。

The floor bearing plate is used to replace the original formwork in high-rise buildings. The material of floor bearing plate refers to the content of zinc plating and the yield strength. Common floor bearing plates include Q235, Q345 and G410.

二、楼承板较土建相比有哪些优势?

2、 What are the advantages of floor bearing plate compared with civil engineering?

楼承板和土建相比重点优势是施工快、省工时、省混土壤、功效好、不需求爱护、它直接用作永恒性模板运用，且持久耐用。(因为楼承板不妨多层施工)防炎功能强等。

Compared with civil engineering, the key advantages of floor bearing plate are fast construction, labor saving, soil mixing saving, good efficiency, no need for care, direct use as permanent formwork, and durability. (Because the floor bearing plate can be constructed in multiple layers) with strong anti-inflammation function.

三、楼承板的重点特点是什么?

3、 What are the key features of floor bearing plate?

分量轻、强度高、承重大、抗震性好、施工简单快捷、拼装简便、替代传统模板、改良传统模板缺点、可作为结构强度一部分、减低原料本钱、易于配筋、配线、配管之施工、外表整洁雅观。

Light weight, high strength, large bearing capacity, good seismic resistance, simple and fast construction, simple assembly, replacement of traditional formwork, improvement of traditional formwork defects, can be used as a part of structural strength, reduce raw material cost, easy reinforcement, wiring, piping construction, clean and elegant appearance.

四、楼承板不配筋不妨吗?

4、 How about floor bearing plate without reinforcement?

都需求配筋的，只是量大量少的问题，不妨研究钢筋桁架楼承板，对照省事，而且不妨设计跨度较在的无维持板跨，减少或许基本不用临时维持。

There is only a large amount of reinforcement required. It is better to study the steel bar truss floor support plate and compare it to save time. It is also better to design the non-sustainable slab span with a larger span, which may be reduced without temporary maintenance.

五、楼承板的品种?

5、 What kind of floor bearing plate?

楼承板分为开口式、闭口式和钢筋桁架板。

The floor support plate is divided into open type, closed type and reinforced truss plate.

六、什么是楼承板的波高?什么是楼承板的波距?

6、 What is the wave height of the floor bearing plate? What is the wave distance of the floor bearing plate?

YX73-140-760型楼承板基本参数波高：73mm波距：140mm有用宽度：760mm张开宽度：1000mm(厚度规格：0.8mm,1.0mm,1.2mm)

YX73-140-760 floor bearing plate basic parameters wave height: 73mm wave distance: 140mm useful width: 760mm opening width: 1000mm (thickness specification: 0.8mm, 1.0mm, 1.2mm)

七、楼承板的厚度?

7、 Thickness of floor bearing plate?

惯例厚度为0.8mm-1.2mm。钢筋桁架楼承板的底板厚度通常是0.5mm。

The conventional thickness is 0.8mm-1.2mm. The thickness of the bottom plate of the reinforced truss floor support plate is usually 0.5mm.

楼承板可以作为现浇混凝土的模板。这样就省掉了施工中安装和拆除模板等工序，从而节省了时间和劳动力。您有需求就来我们网站http://jyjfsj.com咨询吧！

The floor bearing plate can be used as the formwork of cast-in-place concrete. In this way, the installation and removal of formwork and other processes during construction are eliminated, thus saving time and labor. Come to our website if you need http://jyjfsj.com Ask!