楼承板在安装过程中，固定环节须使用螺钉，螺钉在固定环节中起着重要的作用。以下是用螺钉固定济南楼承板的注意事项。

During the installation of the floor bearing plate, the fixing link must use screws, which play an important role in the fixing link. The following are precautions for fixing Jinan floor bearing plate with screws.

在螺钉旋紧时，施力均匀，用力不能过安全扭力值。保持螺钉和螺母的中心轴垂直于被锁面，不要倾斜，减少偏转角度。拧紧螺钉时，应选择扭矩扳手或套筒扳手，以避免过度用力，并将控制扭矩控制在安全库存扭矩范围内。在高温下使用时冷却，使用时不要快速旋转，以免温度快速上升导致锁定。

When the screw is tightened, the force shall be applied evenly, and the force shall not exceed the safe torque value. Keep the central axis of the screw and nut perpendicular to the locked surface, do not tilt, and reduce the deflection angle. When tightening screws, torque wrench or socket wrench should be selected to avoid excessive force and control the torque within the range of safety stock torque. It shall be cooled when used at high temperature. Do not rotate quickly when using to avoid locking due to rapid temperature rise.

1、旋紧螺丝的过程中，施力有必要均衡，用力不得大于安全扭力值;

1. In the process of tightening the screw, the force should be balanced, and the force should not be greater than the safe torque value;

2、保持螺丝、螺帽的中心轴线与被锁面平直，千万不能呈现歪斜，减少偏转视点；

2. Keep the central axis of the screw and nut straight with the locked surface, and do not skew it to reduce the deflection viewpoint;

3、楼承板厂家告诉你，在高温状态下运用时有必要冷却，同时在运用时切勿快速旋转，避免温度快速上升从而呈现锁死情况；

3. The floor bearing plate manufacturer tells you that it is necessary to cool down when operating at high temperature, and at the same time, do not rotate rapidly during operation to avoid the rapid rise of temperature and thus the situation of locking;

4、咱们应选用扭力扳手或套筒扳手来旋紧螺丝，切勿用力过大（将控制扭力控制在安全库存扭矩范围内）。

4. We should choose a torque wrench or socket wrench to tighten the screw, and do not use too much force (control the torque within the range of safety stock torque).

楼承板具有杰出的延展性，所以运用不当就很容易导致螺丝与螺母无法旋开，呈现锁死的现象。所以咱们在运用螺丝固定楼承板应该注意以上的相关注意细节，更多的事项就来我们网站http://jyjfsj.com进行咨询！

The floor bearing plate has excellent ductility, so it is easy to cause the screws and nuts cannot be unscrewed due to improper use, presenting the phenomenon of locking. So we should pay attention to the above details when using screws to fix the floor bearing plate. For more details, please visit our website http://jyjfsj.com Consult!