在使用的过程中，在悬臂条件下，楼承板仅作为永久性模板。悬挑的长度可根据楼承板的截面特性来定。为了防止悬挑板的开裂，需在支座处依结构工程师的设计配上负筋。

55世纪In the process of use, under the cantilever condition, the floor bearing plate is only used as a permanent formwork. The cantilever length can be determined according to the cross-section characteristics of the floor bearing plate. In order to prevent the cantilever slab from cracking, negative reinforcement should be installed at the support according to the design of structural engineer.

楼承板搁置在钢梁上时应防止探头。铺料时操作人员应系安全带，并保证边铺设边固定在周边安全绳上。 焊接采用熔透点焊连接，施焊前应准备边角料引弧试焊，调整施焊电流。

55世纪When the floor bearing plate is placed on the steel beam, the probe shall be prevented. When paving materials, the operator should fasten the safety belt and ensure that it is fixed on the surrounding safety rope while laying. Penetration spot welding is used for welding. Before welding, the welding current shall be adjusted by preparing the leftover materials for arc striking test welding.

55世纪在进行建筑的过程中，楼承板是一种非常重要的一种辅助材料，而且有着非常重要的作用，主要用作永久性模板，也可被选为其他用途。压型板表面压纹使楼承板与混凝土之间产生大的结合力，使二者形成整体，配以加劲肋，使楼承板系统具有高强承载力。

55世纪In the process of construction, floor bearing plate is a very important auxiliary material, and has a very important role, mainly used as a permanent template, can also be selected for other purposes. The embossing on the surface of the profiled plate can produce the maximum binding force between the floor bearing plate and the concrete, and make the two form a whole. With the stiffening rib, the floor bearing plate system has high-strength bearing capacity.

因楼承板底部无水平模板及垂直支撑，浇筑混凝土时布料不宜太集中，采用平板振捣器及时分摊振捣。产品广泛用于电厂、电力设备公司、汽车展厅、钢结构厂房等工程中，如果您有产品需要，欢迎了来电进行咨询。

55世纪Since there is no horizontal formwork and vertical support at the bottom of the floor bearing plate, the distribution of concrete should not be too concentrated when pouring concrete, and the plate vibrator should be used to share the vibration in time. The products are widely used in power plants, power equipment companies, automobile exhibition halls, steel structure workshops and other projects. If you have product needs, you are welcome to call for consultation.