工程建设的扩建，让越来越多的材料有了广泛的应用，济南泡沫复合板就是使用效果和频率都比较好的材料，在施工时复合板要有正确的施工方法，注意一些相关的事项，这样才能保证整个工程的顺利进行。那么，泡沫复合板在施工中需要注意什么呢，为了能让材料使用的更加长久需要怎么储存呢，带着这些问题，我们一起来了解下。

More and more materials have been widely applied in the expansion of engineering construction. The Ji'nan foam composite board is a good material with good effect and frequency. During construction, the correct construction method should be applied to the composite board and some related matters should be noticed, so as to ensure the smooth progress of the whole project. So, what should we pay attention to in the construction of foam composite panels? In order to make the materials used more long, how to store them?

济南岩棉泡沫板 施工注意什么？

Ji'nan rock wool foam board construction pay attention to what?

55世纪1、要注意防雨，不能在雨天施工，复合板用于保冷要在加防潮层，在温度特殊低的状况下，其防潮层也需要防火的

1. It is necessary to pay attention to rain proof. It is not allowed to construct in rainy days. When composite board is used for cold insulation, damp proof layer should be added. In case of special low temperature, its damp proof layer also needs to be fireproof

55世纪当温度超过的温度，比如：200℃时，保温加适宜的外护，这样就不会使它的厚度和容重发生转变

When the temperature exceeds the temperature, such as 200 ℃, the insulation plus appropriate external protection, so that its thickness and bulk density will not change

2、保温的设备，保温钉以及管道为利于防腐，可接纳恰当涂层。另外应没有任何走漏的地方。这样可以达到好的效果。隔热设备，绝缘钉和防腐蚀管，可以适当接受涂层。此外，应该没有泄漏的地方。这可以实现好的效果。

2. Insulation equipment, insulation nails and pipes may accept appropriate coating for corrosion protection. In addition, there should be no leakage. This can achieve good results. Insulation equipment, insulation nails and anti-corrosion pipes can be properly coated. In addition, there should be no leakage. This can achieve good results.

55世纪成品在室外保温的情况下易受机械磨损的应宜用金属或塑料包皮，然后留意接头的地方，接缝的密封，需要时加胶质封条，包裹层堆叠局部不小于100毫米。

If the finished product is easy to be mechanically abraded under outdoor thermal insulation, metal or plastic wrapping should be used. Then pay attention to the joint position and joint sealing. If necessary, glue seal should be added. The stacking part of the wrapping layer should not be less than 100 mm.

55世纪当保温对象呈90度放置，且有的高度时保温要有定位销或支承环，间距不要大于3米，以防保温资料在有震动时向下滑动。

When the insulation object is placed at 90 degrees and some height, the insulation should be provided with positioning pin or supporting ring, and the spacing should not be greater than 3 meters, so as to prevent the insulation material from sliding downward in case of vibration.