Building slabs are also known as pressure plates, steel plates, and steel plates. Formerly known as pressed steel plates, all pressed steel plates are collectively referred to as presses. The floor load-bearing plate is formed by cold bending of galvanized steel plate under rolling pressure. Its cross-section is V-shaped, U-shaped, trapezoidal or similar in waveform. It is mainly used as a permanent template and can be chosen for other purposes. Previously, profiled steel plates were mainly used for roof panels in factories, while the profiled steel plates used for floor slabs were gradually classified as floor slabs.

楼承别名:复合地板、地板、钢板、压盘、地板、钢板地板、复合地板、镀锌板、镀锌地板、镀锌地板、镀锌地板、复合地板、地板、建筑压盘，根据开发迭代，复合层分为：开放建筑承重板、燕尾服建筑承重板（又称伸缩式建筑承重板）、全封闭建筑承重板等。

Building bearing alias: composite floor, floor, steel plate, pressure plate, floor, steel plate floor, composite floor, galvanized sheet, galvanized floor, galvanized floor, composite floor, floor, building pressure plate. According to development iteration, composite layers are divided into: open building load-bearing plate, dovetail suit building load-bearing plate (also known as telescopic building load-bearing plate), fully enclosed building load-bearing plate, etc.

楼承板广泛应用于电厂、电力设备公司、汽车展厅、钢结构厂房、水泥仓库、钢结构办公楼、机场航站楼、火车站、体育场馆、音乐厅、剧院、大型超市、物流中心、奥运场馆等。

Floor support plates are widely used in power plants, power equipment companies, car showrooms, steel structure factories, cement warehouses, steel structure office buildings, airport terminals, train stations, sports venues, music halls, theaters, large supermarkets, logistics centers, Olympic venues, etc.

主要特点：

Main features:

为满足主体钢结构快速施工的要求，可在短时间内提供坚实的操作平台，并可采用多种建筑支撑板。建筑支撑板采用压力板和分层混凝土板铺设，用于流水施工。

To meet the requirements of rapid construction of the main steel structure, a solid operating platform can be provided in a short period of time, and various building support plates can be used. The building support plate is laid with pressure plates and layered concrete plates for flow construction.

在使用阶段，楼板支撑板作为混凝土楼板的受拉钢筋。它还提高了地板的刚度，节省了钢材和混凝土的用量。

During the usage phase, the floor support plate serves as the tensile reinforcement for the concrete floor. It also improves the stiffness of the floor and saves on the use of steel and concrete.

压板表面的受力方式使建筑承重板与混凝土之间的粘结力zui大，使两者形成整体并加强，使建筑承重板体系具有更高的承载力。

The stress on the surface of the pressure plate increases the bonding force between the building load-bearing plate and the concrete, forming a whole and strengthening the two, resulting in a higher bearing capacity of the building load-bearing plate system.

在悬臂条件下，建筑支撑板仅用作永久模板。悬索的长度可以由建筑物支撑板的横截面特性来确定。为了防止悬挂板开裂，必须按照结构工程师的设计将负筋固定在支架上。

Under cantilever conditions, the building support plate is only used as a permanent formwork. The length of the suspension cable can be determined by the cross-sectional characteristics of the building support plate. In order to prevent cracking of the suspension plate, the negative reinforcement must be fixed on the bracket according to the design of the structural engineer.

本文由济南楼承板友情奉献.更多有关的知识点击: http://jyjfsj.com我们将用真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated to the friendship of Jinan Lou Chengban. For more relevant knowledge, click on: http://jyjfsj.com We will provide you with comprehensive services with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned