楼承板作为目前建筑施工中常用的一种，能够在效率很高的条件下搭建一个牢固可靠的施工平台，今天小编简单给大家讲一讲济南楼承板的使用方法，感兴趣的朋友可以了解一下。

As a kind of commonly used floor bearing plate in the current construction, it can build a solid and reliable construction platform under the condition of high efficiency. Today, I will give you a brief introduction to the use of floor bearing plate in Jinan. Interested friends can learn about it.

楼承板

Floor support plate

一、桁架楼板受力模式及组合模式合理，具有现浇混泥土整体刚性，能轻松地完成双向板施工及使用，而普通的压型板下皮垂直于肋方向钢筋无法部。

1、 The stress mode and combination mode of truss floor slab are reasonable, with the overall rigidity of cast-in-place concrete, which can easily complete the construction and use of two-way slab, while the lower skin of ordinary profiled slab is perpendicular to the rebar in the rib direction.

二、在施工中梁间距3米以上，普通的压型板基本上就要加设临时支撑；钢筋桁架模板.大无支撑间距可达5米以上。

2、 In the construction, the beam spacing is more than 3 meters, and the ordinary profiled plate basically needs to be provided with temporary support; Steel bar truss formwork. Large unsupported spacing can reach more than 5m.

三、在桁架模板上临时开洞，基本无需加固，而且机电线、管铺设方便。

3、 The temporary opening on the truss formwork basically requires no reinforcement, and the laying of machine, wire and pipe is convenient.

四、钢板不参与受力、无需耐火及防腐涂料，亦无需担心过火后修复问题，既安全又经济，板底平整、净高有保证，楼板双向刚度一致、抗震性能好，解决闭口板双向配筋问题，钢筋间距及混凝土保护层厚度有保证。

4、 The steel plate does not participate in the force bearing, does not need fire resistance and anti-corrosion coating, and does not need to worry about the repair problem after over fire. It is safe and economical, the bottom of the plate is flat, the net height is guaranteed, the two-way stiffness of the floor is consistent, and the seismic performance is good. It solves the two-way reinforcement problem of the closed-end plate, and the reinforcement spacing and the thickness of the concrete protective layer are guaranteed.

五、双向板设计及施工简便，适用于大跨度厂房，镀层合理、栓钉焊接质量可靠、端部无需穿透焊，楼板抗剪性能好。

5、 The two-way slab is simple in design and construction, suitable for large-span plants, with reasonable coating, reliable stud welding quality, no need for penetration welding at the ends, and good floor shear resistance.

楼承板是将楼板中的钢筋在工厂采用进口设备加工成钢筋桁架，并将钢筋桁架与镀锌钢板在工厂焊接成一体的组合模板。在使用阶段，钢筋桁架与混凝土共同工作，承受使用荷载。更多相关使用事项就来网站http://jyjfsj.com咨询吧！

The floor support plate is a composite formwork that uses imported equipment to process the steel bars in the floor slab into steel bar trusses in the factory, and welds the steel bar trusses and galvanized steel plates into a whole in the factory. In the use stage, the steel truss and concrete work together to bear the service load. For more information, please come to the website http://jyjfsj.com Consult!